You can download the bluetooth software in the Firmware and Files page.
Make sure you are using the software linked in that page and not the Demo Studio software from Ikki68 2020.
If you're having trouble with the software please see Troubleshooting Guide
All switch light effects support global control: brightness increase/decrease (a total of 5 levels default to the fifth level), speed (a total of 5 levels default to the third level).
Fn + ↑ = Increase brightness of the keyboard, 5 levels in total
Fn + ↓ = Reduce brightness of the keyboard is reduced, 5 levels in total
Fn + → = Speed up the lighting effect, 5 levels in total
Fn + ← = Slowed downs the speed of the lighting effect, 5 levels in total
The above control methods support long-press continuous adjustment, single-press once to adjust a level, and long-press to continuously adjust more than one level. When the limit value is reached, the indicator will flash 5 times.
Fn + O = switch light backlight switch
Fn + Z = switch lighting effects cycle, supports 17 kinds of effects.
Fn + X = Backlight color switch
Fn + C = Underglow & LOGO LED lighting effects cycle
Fn + V = Underglow & LOGO LED on/off
Fn + B = Underglow & LOGO LED change color
FN + P = (short press) Bluetooth/USB wired mode switch. (The full key light flashes white for 5 seconds)
FN + P = (long press for 5 seconds) to enter Bluetooth pairing mode. The P key keeps flashing white during pairing, and stops flashing after the pairing is successful.
FN + Q / W / E / R / T = supports storing 5 sets of Bluetooth devices.
FN+P
(short press) to switch to Bluetooth mode.FN+Q/W/E/R/T
FN+P
for 5 seconds, at this time the P key continues to flash, indicating that it has entered the Bluetooth pairing modeP
key stops flashing and is completed.If using Bluetooth connection, please switch the keyboard to Bluetooth mode, if using a data cable connection, please switch the keyboard to USB wired mode. Otherwise, the keyboard cannot be used normally.
Fn + Esc = `
Fn + Shift + ESC = ~
Fn + (1 to +) = F1 to F12
Fn + S = MAC system
Fn + A = WIN system
Fn + P = Bluetooth / Wired mode toggle
Fn + Win = lock/unlock the WIN key
Fn + Left Ctrl = Switch between F area and number keys cyclically
Fn + Space = Long press 3S to restore factory settings
Plug in the USB cable to automatically charge